Grit Removal

Grit is removed by a vortex type grit chamber. The unit is designed to remove grit down to 100-mesh size at sustained average flow up to 4 mgd with minimal carry over of organic material. The grit chamber consists of a circular cast in place of concrete chamber with a low speed-rotating paddle to enhance separation of grit and organic material. For reliability, a recessed impeller pump is used to remove settled grit from the grit chamber. Grit is discharged to a cyclone type separator followed by a screw type grit classifier to remove excess organic material and dewater the grit prior to discharge to a disposal cart. The grit pump and classifier are interlocked to operate together with operating frequency and duration controlled by an adjustable timer.

More in this category: « Screening Influent Flow Metering »

More Treatment Process

Design Data

Treatment Design Data

Design Criteria

The treatment process is designed on the basis of the…

Treatment Facility

This summarizes key elements of the treatment process, equipment selection…